[Rewarded Review] Love the Simple Design

Really love the design of this one, nice and simple. Nice quality metal, feels like brass. The oil rubbed finish was decent. A bit brown and likely just a dip or a paint rather than an actual rubbed metal but I guess that is to be expected. Install is typical, nothing out of the ordinary there. I think really the only shortcoming is perhaps the finish, but again, it's not a huge deal. All in all, it does exactly what it says it does.

[Rewarded Review] Time Saver

This is a very functional shower arm to use in conjunction with the rain shower heads. I have purchased two of the rain shower head and is using this one to keep from having to redo the water lines o accommodate the shower head. It saves the added expense of getting a professional plumber to do the installation and also time and effort. Overall, the shower arm worked well and the flange was wide enough to cover the hole in the tile made for the original arm. It looks very good and was very sturdy.

[Rewarded Review] Looks great!

Thai luxier brand name 15 inch shower arm has worked out great in my bathroom. I bought this and the slide bar to go in my bathroom remodel. I got this one in matte black and I love the look of it it’s super sleek and modern. It matches perfectly to the rest of my bathroom. Installation was super easy. The instructions were easy to read and straightforward and I think it looks awesome.

[Rewarded Review] Beautiful Brushed Gold Rain Shower Arm

This 16 in. Luxier Shower Arm does exactly what it is supposed to do. Namely, extend your rain shower head further away from the wall so you can get under it when it is pointing straight down for that full rain shower effect. It’s brush gold and it looks beautiful. It has ½" FIP threads for your shower head and ½" NPT threads for where it hooks to the fitting inside your wall, which is standard.

[Rewarded Review] Good solution if using existing wall mount point with proper clearance

Attractive brass shower arm with a brushed gold finish. At 15” it provides a good distance from the wall so you don’t feel overly crowded. It comes with a simple yet attractive flange that nicely covers the plumbing connection point. It has 1/2" connections at either end which are fairly standard for most showers. I am a fan of the Rain Fall style shower heads which are implemented either by a vertical ceiling mount (my preference) or this L shaped shower arm. If you have a wall mount installation/connection point it can be expensive to switch to the ceiling mount. This is a good alternative if your wall connection point is high enough that you can install the shower head and comfortably stand beneath it. You probably need a good 12 inches of clearance to your head in order to get maximum benefit of these types of shower heads.

+1 more

Very nice color and great material

[Rewarded Review] FABULOUS!!

This is an excellent but simple shower arm. I like the matte black, it's very subtle and isn't a big shiny eyesore. I attached a rain shower head in the same matte black. The instructions were simple and I would follow them to the letter and you'll have no trouble. The worst case scenario is you'll have trouble getting off your old arm as it's probably gotten a bit rusted on. I found that my shower arm did not have the appropriate amount of Teflon tape so I would make sure that you wrap it three or four times as suggested. This will stop any leaking in the wall. Do the same for the shower head.

[Rewarded Review] 15" Extender

The LUXIER 15 in. Shower Arm and Flange, Brushed Nickel has a nice brushed finish but it a little low in my shower for a tall person with my waterfall showerhead. It would probably work if it had a 45 degree instead of a 90. I need a poolside rinse off shower so that is my next little project. I'll try to attach it to a corner post on my covered deck near the pool.

[Rewarded Review] I Like This Shower Arm

I like this shower arm. I replaced the old one that was angled at forty five degrees with this one and I am much happier with it now. My shower glass would get splashed higher and it was starting to spot. This shower head directs the water directly on my head and upper body and doesn't blast me in the face. The installation was simple enough for any diy'r to do. About all you need is teflon tape for the threads on each end of the arm. About a ten minute job start to finish. And don't use pliersto for tighten as you will probably probably scratch the finish. I recommend.

[Rewarded Review] looks good

This shower arm not only looks great but it also works great the oil rubbed bronze is a great contrasting color in any shower , The 15 inch reach is perfect to reach the center of most all showers and the change over from a standard arm is fast and simple just don't forget the Teflon tape . just screw it in and add your shower head and done . Oh yeah put the flange on also how easy is that

[Rewarded Review] Beautiful Simple Design Easy Installation

If you are looking for a simple upgrade to your shower this is a great product which can be installed in five minutes. Removing the old short shower head pipe is also a less than five minute project. Finding a waterfall shower head that improves your shower use is also easy and fast especially once the 15” Luxier is ready will move the satisfaction needle to the wow category. Little changes make big differences and this extension is a living example of a good way to spend a little time on a useful beautiful home improvement.

+1 more

[Rewarded Review] Great looking shower pipe.

This is a nice looking shower pipe for rain head shower installation. The finish is consistent, and appears to be a thick plating. It is a nice upgrade to my shower. In fact, it is probably to nice of an upgrade. Now I am going to have to upgrade the rest of the shower.

+1 more

[Rewarded Review] Great for rainfall showerheads

Nice looking 15 inch shower arm from Luxier. Made of durable brass and finished in great looking brushed nickel. It’s an excellent choice for installing a rainfall showerhead due to it’s long length. Comes with a flange to cover the hole in your wall where the arm connects to your plumbing. Standard 1/22 inch. It also comes with a two year warranty.

[Rewarded Review] Rainfall Shower Head Extension

Acquired this sixteen inch shower arm for the explicit use of the shower head as a rainfall shower. Comes with the sixteen inch extension in brushed nickle finish with a brass material fabrication which will give years of rustproof finish, the one and one-half inch flange in stainless steel. Comes with a two year warranty from the manufacture. It is very important that two rules of installation be followed. (1) Use white Teflon tape on both ends of the pipe threads to assure water tight connections on both ends (2) Do not over-tighten the extension which might cause leakage at the threaded end in the wall which is the plumbing elbow in the wall.

+1 more