Awkward to put together,and looks really good.

Decmode 72 in wood & iron(?) shelving unit.....would of been nice if I had help to put it together, but I managed, (being a 64 year old female). The tools that came with it, a philips head screw driver, a small four inch long flat 9/16th hex sided tool, and an Allen wrench, were great if one didn't have any tools. I used the Allen wrench to screw the metal grid sides to the wood top. It was awkward to try to get the metal side and top to stand up and balanced on their sides abut in a 90 degree angle to get the "bolts" screwed in. The metal grid side had two threaded 2 1/2 inch long spindles that slid into holes on the wood bottom, where you put a washer and hex sided nut on. Instead of using the small hex tool, I used my ratchet wrench, easier on my arthitic hands. The ONLY DOWNER was the shelf ends are suppose to be screwed down from underneath the metal bars they sit on and there are NO PREDRILLED HOLES in the wood shelf and trying too screw into wood 1/8th from the end would likely cause it to SPLIT, so to finish putting together the unit I am going to have predrill tiny holes with my cordless drill.