Over 15yrs Hard Use Never Failed!

Bought me & my boys each a set well over 15yrs ago for Christmas and none have ever failed us yet. We have these, swivel head and their first basic designed sets and never had an issue from any.

Works well, polished finish very slippery when greasy or wet

Well built, strong enough or most fasteners. Not intended for striking or frozen bolts. direction lever works well and stays out of the way. I wish they used a more readable stamp for size and placed it on the head. Nearly impossible to read size when laying under the car or in any situation with low light. Polished chrome looks nice but is very slippery when greasy.

This tool set sold me more Snapon wrenches than any number of flyers, promos, or trucks. I wanted...

This tool set sold me more Snapon wrenches than any number of flyers, promos, or trucks. I wanted reversible ratcheting wrenches because its possible to lose a non reversible wrench in tight areas if youre not careful. The ratcheting mechanism in all of the smaller wrenches is gritty and they have a tendency to change direction without warning and seize in place, turning the ratcheting wrench into a big regular combo wrench. Just poor quality overall. I got sent on a road trip out of state to work on a hydraulic manifold on a CRJ 900 aircraft, and I was trying to remove a nut. I didnt have access for a box end, a ratchet, or pliers; it was open end of a combo or a chisel, and I didnt have a chisel. The first wrench to come to my hand was a gear wrench, so I put the open end on the nut and it rounded. So I dug in and found my Snapon wrench, same size, same face of the nut, and voila it came right off. Which means that Ive basically thrown all of the money I spent on this set away; Im going to have to go back and buy a new set from a better manufacturer.

They work like a champ. Ratchets and ratcheting wrenches rarely come lubed. Lube them before use....

They work like a champ. Ratchets and ratcheting wrenches rarely come lubed. Lube them before use. A little Tulus 36 goes a long way.

As others have said these are thicker then the old ones. One other reviewer showed a pic of 2 dif...

As others have said these are thicker then the old ones. One other reviewer showed a pic of 2 different types non reversible VS reversible well thats not fair. But putting these side by side with my old reversible ones and these are thicker and slightly different all the way around. We will see if they hold up as well at least. Time will tell.

After only 2 months of using this in my daily job, the 10 mm gearwrench failed. The gear strippe...

After only 2 months of using this in my daily job, the 10 mm gearwrench failed.

Got a great deal on these. Haven't found it cheaper anywhere else. Works great! I bought this set...

Got a great deal on these. Haven't found it cheaper anywhere else. Works great! I bought this set because I need to match my standard set. I haven't had any problems with then yet. I'm a Crane Technician, and these reversing switch comes in handy when your up in the air in some tight spaces.

[Rewarded Review] I used this set for removing the exhaust manifolds from a 2008 Mustang GT. They definitely make i...

I used this set for removing the exhaust manifolds from a 2008 Mustang GT. They definitely make it much easier to remove fasteners where a ratchet can't be used. The heads are offset 15 degrees from the wrench so you can work with the wrench away from interfering surfaces. There is a nice reversing lever that changes the direction of the ratchet. I estimate the ratchet has about 80 teeth because 20 clicks turn the wrench about 90 degrees.

[Rewarded Review] I like this set of wrenches it has open end and ratcheting box end with reversible switch on the ...

I like this set of wrenches it has open end and ratcheting box end with reversible switch on the end so you don't ever have to take wrench off to tighten or loosen nuts or bolts with just a flick of the thumb. they seem to have more torque and better rotation in tight spaces. The Gearwrench brand has been a top quality tools at a less expensive price. I will be purchasing more of them.

[Rewarded Review] I have needed some metric tools for a very long time. These combination ratcheting wrenches are w...

I have needed some metric tools for a very long time. These combination ratcheting wrenches are wonderful. I didn't notice it in the picture, but you don't have to turn these over to reverse the ratcheting. There is a knob like a lot of the socket ratcheting handles that reverses the action. They are also on a 15 degree angle so that you don't rap your knuckles on anything.

[Rewarded Review] This is a great ratcheting wrench set for for homeowner/mechanic use especially at its price poin...

This is a great ratcheting wrench set for for homeowner/mechanic use especially at its price point. The sizes are easily read, and the chrome finish is outstanding. These ratcheting wrenches have almost no play. These are great for tight spots that you can’t fit a normal ratchet and socket. I had some trouble with the 17mm and 19mm wrenches binding up on me on the tightening setting, but after I worked them awhile, they stopped binding and work perfectly. The case could use some work. It wastes to much space in a toolbox unless you plan on hanging it on the wall.

[Rewarded Review]

This is an 8-piece Metric Reversible ratcheting wrench set made by GearWrench. The reversible on tighten and loosing nut and bolts. There is a levier to reverse the action, no need to flip it over to change direction. The ratchet box end needs as little as 5 degree to move the fastener versus 30 degree from a standard box end wrench. So when you are in tight spots you can only move it a little and it can tighten or loosen those nuts and bolts. The sizes it comes with 8, 10, 12, 13, 14, 15, 17 and 19 mm. It comes with a Manufacturer's Limited Lifetime warranty.

[Rewarded Review] As a woodworker, wrenches are not the most common used tool I have, but I can tell you this much....

As a woodworker, wrenches are not the most common used tool I have, but I can tell you this much. They feel like quality workmanship! Feels good in the hand and makes a nice firm grip on the nut you are turning. I'm sure what most tool owners will tell you, is due to lack of space you need to have each one of your tools to do as much quality work as it can, versatile, and take up minimal space doing it. I mounted these in the case they came in, on a wall in my shop in a corner I was not using. This may not work for a mechanic, but for my needs it was perfect!

+1 more

[Rewarded Review] I bought some of these ratchets probably 10 years ago and these are every bit as good as my old o...

I bought some of these ratchets probably 10 years ago and these are every bit as good as my old ones. I still have the old ones. These are an offset version wrench, with the handle being bent so you don't skin your knuckles. The ratchet mechanism is still pretty unbreakable. The old model was flat and to reverse the wrench you had to flip it over. These have a switch on the base of the box end, that allows for changing the direction . I exerted some serious stress on this mechanism and it didn't let go so I have to give it a thumbs up. If you're a home owner looking for a great set of ratchets or you're a professional looking for a good set these are very good. These ratchets are not thin walled but for regular everyday stuff they're good. Tough ratchet mechanism and nice chrome finish.

[Rewarded Review] For the most part a good set, however the "switch" where you change the direction of the ratcheti...

For the most part a good set, however the "switch" where you change the direction of the ratcheting will sometimes get hung up especially if I get my hand / finger on it while I am using it in a close quarter situation like I often find myself in when I am working in the engine compartment of the car. These are are also small and compact so I can get into those tight spots.

[Rewarded Review] These wrenches are made in China and appear to have somewhat better than usual machining for Chin...

These wrenches are made in China and appear to have somewhat better than usual machining for Chinese products. They aren't snap-on tools, and I wouldn't use them in a professional, heavy use environment. For the homeowner, though, these are just fine. I haven't used them enough to determine their longevity. So far, so good. I do believe the wrench set represents a good value for the non discriminating homeowner; 8 wrenches for $40!

[Rewarded Review] This is a 8 piece set spanning 8mm to 19mm so it is missing a few. The ratcheting mechanism has ...

This is a 8 piece set spanning 8mm to 19mm so it is missing a few. The ratcheting mechanism has little play and the handle movement to get the next gear is also small. They are nicely polished and clearly marked with the size. They feel good in the hand and like they are quality made. They come in a plastic tray that is just OK. I like them and think they are a good addition to my shop.

I got rid of all my other ratchet wrenches. These have a slight angle on them. They are amazing. ...

I got rid of all my other ratchet wrenches. These have a slight angle on them. They are amazing. I love that they grip onto everything. It says it's not made to brake bolts. But it does. I put this thing through the wringer every single day at work. And I actually use every single wrench. On American vehicles I'm using a 10, 13,15. On a Mercedes I catch myself using the twelves the 11th the 14th. once you have this you'll never use any other wrench. This is my go-to set. I have now grabbed all my other wrenches and Chuck them in a lower drawer and have this one available for quick easy access. I would recommend this to anybody. if you have a hard-to-reach place to get to this will do it. The only thing I have negative about it is the ratcheting part, its a little thick it's hard to squeeze into certain places. but still these things are awesome I'm telling you. I would recommend it to anyone, especially my co-workers this stop boring mine.

I purchased a set some time ago. The 5/8" wrench broke (no ratchet, spins freely) after very lit...

I purchased a set some time ago. The 5/8" wrench broke (no ratchet, spins freely) after very little use. I have contacted GearWrench twice without a response. These wrenches are too expensive for the poor quality and inability to repair them when they break.

Not very happy

I used the ratchet end of the 15 mm wrench from this set to try and run the nut up the threaded stud on the top mount of a front shock the other days when I was changing out the shocks on my Silverado. The ratchet mechanism came loose and fell apart. I got this set and the SAE set as Father's Day gifts last year from a local auto parts store. The package had "Made in China" printed on the label. I still have the store receipt so I hope to get some satisfactory service and exchange the wrench. Fortunately I still have my original Craftsman combo wrench sets and I was able to complete my job. I had thoughts of selling them in a yard sale, not now. I will sell these Gearwrench sets instead. I found plenty of USA made Craftsman ratcheting wrench sets on eBay as well as great deals on some Matco and Cornwell ratcheting wrench combo sets. I will invest in those instead.