This product is awful. It's exceptionally hard to build, partly because the holes never line up and partly because the instructional video is terrible. It is a 45-minute video, yet my wife and I (who are very handy) needed NINE HOURS over two days to get this built. It's rickety and uninspiring.

Really difficult to set up

Really poorly made. The instructions are missing information and aren't clear. You need to work out lots of things yourself. Most of the holes don't line up. I had to drill new holes in most of the pieces and the supplied drill bit only lasted a few holes before going blunt.

Good shed with some minor improvements required.

This item has some good points and some not so good. The app is great, the video instruction is very good. This is required though as there is no instructions included. If you do not have internet access i.e. remote site, you are stuffed. The check lists of parts required is a great idea, the app worked very well with this. The pre-drilled holes are about 40% accurate, thankfully they supply a 3mm drill for these occasions. I had a couple of struts that had been cut short, this makes it very difficult to join at the end of construction and pop rivet. Luckily I am a sheet metal worker and had some spare metal that I bent and fitted so I could join these areas. One was obvious it was short as the support was cut in the middle of the end pilot hole.The snap lock system is good, to begin with, but I feel the build needed some more holes and fittings so the snap system is not solely relied upon. I moved the shed some small distance and then had to re-snap in the rear of the panels and supports. The whole concept of the shed is very good but I felt who ever produced the support brackets needed to pay more attention or insure the used jig was in the correct place before drilling and cutting. there were some holes that had not been completely drilled through, again the 3mm drill came to the rescue. :-)

Looks good once assembled

Instructions not easy to understand, required to rewatch sections over and over, and not sure how things fitted. When told put screws in aligned holes about 60% didn't align. Think paper instruction may have been easier to follow.

Monument bike shed

Alot of bits and pieces to put together but I'm actually using it for a dog shed, outside so the dogs hv shelter

Bike shed

I bought this 6 weeks ago from Mitre10 - after waiting the 5 weeks for delivery and then finally unpacking it. Good points are made from BHP steel. Bad points it’s thin enough you can cut it with a can opener- it arrived with some sheets bent badly- even though the box was not damaged so I can only assume it left the factory with the sheets packed damaged so not much care there. After bending it back in shape it was very easy to assemble.

Great product

Brought this product at it great quality and easy to erect

Terrible construction/ poor instructions /

Took two people nine hours to complete this shed. Poor quality materials/ lots of re drilling to ensure some alignment. So Tough Too easy couldn’t be further from the truth. The paper instructions were terrible and the YouTube video was not clear at all.

Bad instructions. Poor manufacturing.

I bought this 2 weeks ago from Bunnings. This is an incredibly difficult shed to build despite claiming it to be easy. The instructions were hard to read and missed certain parts and described other parts that weren’t listed. The instructions drawings were very complex. The parts themselves were poorly aligned and didn’t fit. Some identical parts were short by more than 14mm.

ABSCO SHED 7.5' X 2.5'

The shed was received badly damaged and parts missing.

+9 more

Perfect storage shed

Purchased this a shed to tidy up the back yard and to store all the kids bikes and toys and it’s perfect! Was easy to install, instructions were straight forward and it all came together superbly. Would highly recommend this product.

Great shed for my fire pump

Easy to build an sturdy

Bike Shed

Just assembled amd it was handy having the instructions via video, showing step by step

Bike shed

not enough room for the bigger bikes so needed to have more depth

Terrible product

I expected this product to be a lot better, even after reading some of the reviews. I didn't think it would be this bad. The instructions are very poor. Most of the pre-drilled holes didn't line up. Many other holes required drilling. Components are flimsy, especially the hasp and staple. Also my shed is missing the corner braces as shown in the pictures. The doors would not close, I had to drill the rivets out and reposition the doors to get them to close. I also added a cross brace to add some strength to it as the front section is very flimsy. I feel ripped off as not only does it now seem over-priced given the poor quality, but the hours I put into I could have almost built a shed from scratch.

Misaligned rivet holes

Recently purchased and on attempting to assemble we found most of the predrilled holes would not line up and they were not the proper size for the rivers and screws provide

So easy to build!

After a difficult experience with another shed build I was keen to see how the app would help with the build. In addition to the snap together sections and the individually numbered parts, the videos in conjunction made for a very straightforward build. I was even able to involve my son in some of the simple parts of the build which gave him a great sense of accomplishment when he parked his bike in a shed he helped to build!

its a handy size

i bought it to turn into a compressor shed. Most of it went up with out a hitch. but found in some of the major parts. the pre drilled holes were out by half inch to an inch. eg 91 g stabiliser top hole at the v on both sides missed the stabiliser jam completely. so either the jam was an inch short on either side. or a few to many beers were had on a friday when they were drilled unsure.

Would not buy again

I purchased this shed to keep the kids bikes out of the elements, in all honesty, it does do that. The whole build process however was a nightmare. I have built a lot of things in my time and this was by far the most frustrating build. Not by difficulty, by what needed doing in regards to alignment that was meant to be a kit that just needs assembling. Maybe 3 holes lined up with what they were meant to align with. Screws penetrating to operating space which I have swapped out for rivets but was not designed this way. Almost every corner is a sharp edge that needed rounding over. Instructions are not easy to ascertain orientation of parts and making a lot of assumptions along the way.

Need to be an experienced DIYer

I am a seasoned DIYer and even I struggled putting together the Bike Shed, paper instructions just don't cut it, Thank God for the installation videos as they really helped.