Showed up bent from shipping.

They work… no flickering or noise. My only issue was that they were all “bent” during shipping. The rims are extremely thin and bend easily. I spent a little time bending them all straight before installing them. Great price, but yours will probably be bent as well….

Very easy to install. Like the capability of changing the light color.

Very bright!

These LED lights are very bright and work perfectly in my laundry room. I thought I was going to have to install more light fixtures to get the room properly illuminated but these units did the job.

[Rewarded Review] No quite there.

I’m not sure why, but these lights seem to make me a bit dizzy in the evening. They feel a bit too bright, almost like staring into oncoming car headlights. I’ll try installing a dimmer switch to see if that helps. If not, I might have to return them.

Good

Easy installation, and brighter room

Fiet lights are good

I have Fiet all my ceiling now they are easy to replace the old ceiling light .. recomment to Ebay buyers

[Rewarded Review]

Easy installation and great new look for lighting

[Rewarded Review] Great upgrade

These are the best upgrade to any household. So easy to install and looks so much better than the recessed lighting bulbs. Just unscrew your old bulb, then screw the attachment on the new light. Click it in and you are good to go. Save a bunch on bills with LED. You can change the brightness. 5000k - 4000k - 3500k - 3000k - and 2700k. This won’t disappoint.

+1 more

[Rewarded Review] Simple to use

The FEIT Electric 5 & 6 inch recessed downlight replacement lens kit is a great product that is easy to use. The kit comes with an integral LED light that only uses 14.3 watts instead of your old incandescent lamps. The trim fits both 5 inch and 6 inch recessed housings. The kit comes with a screw adapter to just insert into the existing lamp socket to replace your old bulbs. This unit is designed for 120-volt installation only. The lamp is dimmable and you can choose the color of the light output that you wish to have. Choosing the light output can be performed in two different ways. You can pre-select your light intensity before the installation, or you can choose the color with your wall switch. Anywhere from soft white (2700k) to daylight (5000k). This is a convenient way to upgrade your existing downlight to LED without any construction work or wiring required. This light is designed to last up to 45 years so no need to store clubs or spend money purchasing them. This unit is suitable for wet locations as well. Simple to use and looks great.

+2 more

[Rewarded Review] Good retrofit, light choice

This is a nice retrofit for ceiling Canlite‘s from Feit electric. It feels sturdy and the connections and wires are a good quality. The installation goes easily like most of these retro fits. Basically you just screw it in to the bulb socket and then push the spring wires up. of course the proof of its endurance will be in use, which I can’t speak to as we’ve just installed it. There’s a switch at the top where you can change the warmth of the light. I chose to use the preset rather than the method where you use light switch to set the color, as several lights share this switch.

[Rewarded Review] Commercial grade unit, aluminum case, selectable and programmable color temperature, full size 100 degree spread angle lens

This unit has aluminum case which is great for heat dissipation. I got it to replace bad BR40 led bulb. Fixture is easily retrofitted into BR40 enclosures. Standard bulb socket connector is included. Retrofit units save money in comparison to BR40 LEDs in two ways: 1) It tightly seals BR40 enclosure and eliminates hot/cold air leaks between bulb and enclosure in summer/winter times, 2) it is rated for 45 years before mean time failure while BR40 LEDs rates 13 years max. In reality my BR40s do not live more than 2 years. The reason for BR40 shorter life expectancy is very simple. In BR40 LED driver circuit board is sealed inside bulb case. There's not enough surface provided for transferring heat out of bulb body. Circuit board is crammed between LED matrix and bulb base cap. Retrofit units have much larger circuit boards which are positioned behind LED matrix on the back and have their own pancake enclosures. Larger circuit board provides more space between elements and also space to install larger heatsink. Better heat transfer extends life expectancy of this unit 3.5 times over average BR40 while pricewise comparable BR40 only 20% cheaper than this retrofit. Not only this unit is dimmable but if you have other recessed lights in the same room this unit can be also adjusted to match color temperature of other bulbs. Switch on the back has selectable settings from 2700K all the way to 5000K. You can also select programmable mode setting where color temperature is adjusted by flipping light switch on and off. Once desired temperature is selected choice is saved into non-volatile memory if no further changes are made within next 10 seconds. 7 consecutive on and off flips reset driver back to default color temperature choice.

+3 more

[Rewarded Review] Easily blends in, looks great!

Yes! This light conversion kit is simply awesome. It is so easy to covert your old recessed can lights, to this modern flush looking design. Installation is so easy. Remove your old bulb, takeoff the decorative ring on your ceiling fixture. Screw in the adapter into the light socket. Compress the side springs and slide it in. It takes about a minute per fixture. So easy. I love that this has a color adjustment switch on it. I was easily able to get exactly what I wanted, and, if you are blending this in with others, it’s so easy to match. Excellent design, so easy to install, looks fantastic. So happy!

+1 more

Adjust warm to cool from wall light switch.

Very bright with ability to change from warm to cool from the wall light switch. Easy to install in 6” cans with quality torsion springs. Also, the have full range of dim using Lurton LED dimmer.

Great match

Hard to find a match to my existing lights, this did the trick

This has worked well for me. The clips seem to hold it in the fixture well, and the light is beautiful and steady.

Easy Retrofit for Home Lighting

These lights are easy to fit into existing ceiling can lights. They may take a little work to fit in the old opening, but they provide bright lighting and an improved appearance.

Good quality LED light kits

Nice lighting, very easy to install!

great product will buy again

great light will buy again soon like them

Great product

Love the lights best replacement from the old ones.