Love it

not 2700k, they are 3000k

these are advertised everywhere as 2700k but the warmest setting is actually 3000k

Excellent bright lights, but one of them died on me after only a few months.

Very easy to install and 3 different lighting options. I love the way they just link together.

The old lights were easy to remove, and the new...

The old lights were easy to remove, and the new lights strung together quite easy, I got bonus points for how quick, and mess free this project was.

These lights are very flimsy. The hanging hardware supplied with the lights is pure junk. Every single screw stripped after going half way into the wood and made it very difficult to then remove and put in alternate screws supplied by myself. Then the actual hangers all bent but two out of eight. So again I had to remove the hangers a second time and us Self adhesive velcro to hang the lights. The shipping carton was very cheap and all the lights had small dents and scratches and the protective plastic film did not remove from one of the lights, it came off part of the light in small pieces and most remained on the light. The shop lights work and light up fine, but the aggravation with the hardware makes the purchase a very bad deal. Also if dents and scratches are important (to me that was not important because they are going in a workshop) then avoid these.

Thought it was the whole light,,,,just the bulbs, sent them back.

This is absolutely perfect for the basement. It just brightened the whole place up

Again Great as Usual with the H.D.

Great Lights for under my Kitchen Cabinets !!

Perfect for under cabinet workbench. Easy connect, easy install and...

Perfect for under cabinet workbench. Easy connect, easy install and love the adjustable color )dimmable) options.

This works as advertised. Very bright and you can select three different variations of the color ...

This works as advertised. Very bright and you can select three different variations of the color white. We use them in a shop setting 13 mechanics approve.

Terrible and false advertisment

DO NOT ORDER THIS PRODUCT IF WANT THE ADJUSTABLE LIGHTING OPTION!!!! The lights received did not have the adjustable lighting option as shown and described on Home Depot's site. Instead, the manufacturer placed a sticker stating CCT 5000k covering the hole where the adjustable switch is supposed to be. Further, the first customer service rep I spoke with regarding the issue did not care at all about the issue. Sounded more like was being forced to work.

This is my second purchase of these lights for lighting in my shop. They are great, very bright m...

This is my second purchase of these lights for lighting in my shop. They are great, very bright making it easy to work, find tools or put things back where you got them. The light is very bright and simple to mount and plug in to make a string as you go. They come with all the connectors to power them up in any configuration you can imagine. There is a variety of lengths available to fit any configuration so I have a couple more places to light up.

Like the 3 light color temperature adjustments....

Like the 3 light color temperature adjustments.

These are really bright lights that have made my laundry room so much easy to use. Each light ha...

These are really bright lights that have made my laundry room so much easy to use. Each light has a cord with inline switch or they can be connected together with the jumpers. There is a switch to select the color temperature output by each light, warm, neutral or cool. I found the neutral to be a clean white light. Warm was too yellow and cool was too blue. The entire lamp is plastic and doesn't fit together very well. One of the diffusers fell off while I was unpacking and it was a pain to reinstall. The mounting clips are thin and bend easily if the light isn't lined up perfect when you try to snap it in. Bottom line - be careful unpacking and mounting and these are good lights for a utility room, basement or similar area.

+1 more

Not a good shop light could be good uplighting accent. Not as bright as I hoped. Description sail...

Not a good shop light could be good uplighting accent. Not as bright as I hoped. Description sails "each LED shop light 4ft. provides 2,000 Lumens" but it also says each one is equivalent to a 50 watt bulb. A 50 watt incandescent bulb is about 500 lumens so 2,000 would be all 4 not each. A 50 watt fluorescent tube would be about or over 2,000 lumens. A single 4' 32 watt fluorescent tube is about 2,600 to 3,000 lumens so each 4' LED light is about 1/5th of a single fluorescent shop light tube. Comparing them to lights that have similar light output these are noticeably dimmer. If you have them mounted low, like under a shelf, it gives you enough light to see and work under but not very bright. I like that they can be changed from warm, cool or white independently. The set comes with 4 plugs with switches, 3 short T5 connectors to link the lights plus some additional mounting hardware and T5 straight connectors. The standard T5 connectors can be purchased separately in different lengths if you need them. The construction feels cheap but for LED lights I don't think that's a big deal. I did have one of the end caps pull off when I tried to disconnect the cable.

+1 more

This comes as a pack of four lights that resemble four-foot, single-tube fluorescent shop lights....

This comes as a pack of four lights that resemble four-foot, single-tube fluorescent shop lights. These come with cords that allow for each of the four to be plugged in separately (each with its own inline switch), or can be strung together, either with short lengths of cord plugged into either end, or with very short connectors that let you make a single run of lights up to 16 feet long.

very slim, easy to mount. the linking was very handy. very bright. was the exact change i needed....

very slim, easy to mount. the linking was very handy. very bright. was the exact change i needed.

Right away out of the box I could tell that these were very very cheaply made lights. Even just r...

Right away out of the box I could tell that these were very very cheaply made lights. Even just regular handling of them gives the potential for damage. The end caps that hold the unit together are constantly coming loose and require a snap back in. Again, just from regular handling. The clips used to mount them to a surface are probably the biggest selling point of these lights. You just mount them to whatever surface you want and the tube snaps into them. However, the screws that come in the packaging for securing said clips are so short they can barely penetrate. If I were wanting to mount them to sheet rock with any type of anchor it would not be possible. I mounted mine to wooden ceiling joists in my garage and did not feel comfortable with the depth of the screws. I immediately replaced the provided screws with some smaller scrap screws I had laying around. There are two several options for connecting the lights together. They can be done individually, obviously, and a cap is provided to cap the opposite end of the tube from where the main power cord plugs in to. But if desired, you can connect multiple lights using pigtail connectors provided. If you want the lights to run in a straight line there is a rigid short plug that can be used to link lights together. The light these provide is decent. Since there is no shade to direct light down, like on a typical shop light, the light does not aim down as directly as I would like. Overall I am not that impressed.

I want to be able to walk into my workshop and have it light up like a movie set. Unfortunately, ...

I want to be able to walk into my workshop and have it light up like a movie set. Unfortunately, these lights won’t work for my set up. The product description says these lights can be hardwired using the included “wires for hardwiring,” but these lights come with no instructions at all and no wires for hardwiring. From what I can tell based on what was included in the package, these lights are not intended to be hardwired and must be plugged into a wall socket using the supplied switched power cords. This has left me frustrated because in anticipation of this product’s arrival, I had the junction box and PIR occupancy sensor switch wired up and ready to go. I’d planned to hardwire one light and then link the rest together. I could still plug these into a switched outlet, but I can’t use a PIR switch with an outlet… so my original plan is a bust if I use this product.

+2 more