These table legs are “Outstanding.” They are very strong and they look very nice. I applied an “Early American” oil based stain and then finished them with 4 coats of semi gloss polyurethane. The results are very satisfying. My wife and I are completely delighted with them.

Used four of these to make a small table. Finish is pretty good, didn't find four with same coloration, but was fine as the table is painted white. I am pleased with the quality at the price. The pre-installed hardware (bolt) is a nice feature and is easily removed if not needed.

I use these spindle legs for my garden to make mushrooms and they are study

Good buy

Nice legs. Perfect our project. Easy to paint and assemble.

Using these with used fan blades to make dragonflies. They...

Using these with used fan blades to make dragonflies. They are perfect!!

They are pretty but. Little hard to work the lefs

Beautiful legs but one of them was not straight Had to add wood pieces T too to balance the table. Also did not stain well

Look at other options

Screw for connection is set in leg crooked, comes out very easy. wood is almost impossible to sand for finishing.

Great look and price, bad screw construction

Design looks great, however, all screws are not straight (legs angled once in bracket) and the screws pulled out as I was tightening them to the metal bracket. They started pulling out after barely tightening them. Ordered 1 online and bought 3 in store (only 3 in stock). I had to repair 3 out of the 4 by filling screw hole with saw dust/wood glue mixture and then reinserting the screw. Hopefully that solution lasts.

Not quite the right height so I cut an inch...

Not quite the right height so I cut an inch off and fit perfectly.

They were perfect for my project

They were perfect for my project

Nice well built legs for a do it yourself project. They are light weight, almost fell a little ho...

Nice well built legs for a do it yourself project. They are light weight, almost fell a little hollow. That's the reason for the 4 stars. They seem to take some weight pretty well. I have them on a 4ft x 2ft butcher block.

Super easy to install, all 4 I bought were uniform...

Super easy to install, all 4 I bought were uniform and sturdy

Met the need for which purchased. Quality comparable with price.

Met the need for which purchased. Quality comparable with price.

Use a pre-stain before staining to prevent blotches....

Use a pre-stain before staining to prevent blotches.

works

works

The studs are not very secure in the wood, actually...

The studs are not very secure in the wood, actually should be longer. I had to remove the studs and apply epoxy inside the hole and re-install.

I wanted more than one store inventory showed 8 but...

I wanted more than one store inventory showed 8 but there was only 1 in the aisle.

Strong to hold a table top that is heavier than the legs

Strong to hold a table top that is heavier than the legs

They look absolutely lovely on the table my husband built....

They look absolutely lovely on the table my husband built. Than you for asking.

upto the expectation...

upto the expectation