Stronger than the plastic blue box

I was very surprised at how easily this fit in to an afterwork solution. I took out a single gang box, cut the hole a bit larger, and screwed this in place. Positioning could not be easier and it is rock solid. Cost an extra $4, but saved $20 worth of time and is sturdier than an afterwork box with wings.

love it compared to old work i usually use

Easy to work with and install. I wish they also had an option to screw the top/bottom instead of the side.

Easiest way to Chang’s a duplex into a quadplex.

This is my first time using this type of product. It worked great!

This was much better quality than the other standard blue boxes.

Easy to work with in the wall. The screws are sharp!

Waste of time using this box

This was the only 2 gang boxes in stock. So I got one. Not enough space in the box for GFI and a usb-c outlet. I was going to try to modify the box but I decided that would be janky. So now I have to go back to the HD to get another box then return to the job and replace it so the 2 receptacles fit as they should. Not at all happy.

This 2 gang box is so much better than the typical old work box. It mounts to a stud and is very solid and is fully adjustable.

Fit right next the board as intended - quick install and ready to move to next step

Outstanding product! It works as advertised--extremely versatile and high quality.

Great box but watch the inset

Great deep box for those smart switches requiring the room for cables. There is an inset on one side of the box related to the mounting plate to the stud. This was VERY snug to my smart switches requiring them to be positioned hard to the opp side of the box.

true handy box

handy and sturdy

This box position is easily marked on the wall. If...

This box position is easily marked on the wall. If the whole is cut correctly it will slip in and you will easily be able to set the depth and tighten it up. It is the easiest and most secure way of cutting in a box.

An employee was willing and able to help me find...

An employee was willing and able to help me find what I was looking for. I ended up getting another outlet box that was placed in the Sheetrock.

Great design works great

Largest two gang box available was also the easiest old work box to install, and as a bonus can be used for new work as well.

Works great! I needed more room to sort out the...

Works great! I needed more room to sort out the romex runs, this did the trick.

Added 2 extra screws in the rear for extra support....

Added 2 extra screws in the rear for extra support. Saved opening the wall to add an R V outlet.

These boxes are great for Retrofit and new construction. ...

These boxes are great for Retrofit and new construction. The nice thing about them, you can adjust the depth! You're able to reset the depth after if you ended up with: thicker mud, 5/8 and you planned for 1/2, or you just happen to set the box back too deep. They run about twice the price but are worth it when adding to finished walls over the earred boxes. Yes you need to find the stud first and line up the edge correctly. I've even used these style boxes to remove a single gang and replace with a double. It takes care but look original when done.