[Rewarded Review] Beautiful Faucet & Trouble Free Installation

I didn’t think I would like a single handle faucet, but I was wrong. I love the look and quality of this waterfall faucet. It is completely different from the double handle, shiny brass, vintage style faucet that it is replacing due to a major plumbing repair.

+2 more

[Rewarded Review] Little smaller then I thought but looks terrific and works great!

I was very pleasantly surprised at the quality of the faucet. Nice color and finish. Installation was straight forward. My only 'suggestion' would be to label the inlets for the hoses perhaps inside. I looked to see where the hot and cold hoses were to be connected, but, didn't see anything obvious. So once every thing was installed and checked, yep, I had reversed them. But it isn't a big deal and might even work out better swinging the handle to the right for hot and left for cold. The nut that holds the faucet to the sink is plastic and metal. Big enough to hand tighten. I think that will work.

[Rewarded Review] I love this faucet! I love it, i love it, finess at maximum expression.

This is finess! to maximum expression,with soft and delicate touch, from unboxing to full installation an hour and a half. with some help to hold on top. i love the way the water falls softly into your hands. my toothbrush experience will never be the same. Extremely easy to assemble if you take the time to follow the instructions and think about it a little bit. looking at the box and parts you will know which part goes first and what follows. I really love this thing, I love it, I love it! and the cap for the water to drain is push to open, push down to close. the color is just amazing elegant. 1.connect red and blue hoses to faucet.(tight by hand) 2.take out black plastic from allthreat sleeve and the allthreat sleeve pass it thru two hoses with the side with less threat to faucet. 3.slide blue and red hoses thru sink hole. 4. remember to previously before allthreat sleeve gold ring and plastic ring (stay on top of sink. 5.black plastic from the bottom with plastic ring #2 (tight it) 6.apply tefflon to where you are going to connect blue and red hoses. (tight it).

+3 more

[Rewarded Review] The Perfect Faucet

Exactly what we were looking for for our half bath! If you've never installed a sink faucet before, the instructions are straightforward and easy to follow. The finished product is stylish and practical. The color is a true matte black, and it arrived well-packaged without any damage. After installation, it worked perfectly as expected, with ideal water flow from the faucet. I would buy this again.

[Rewarded Review] Nice waterfall faucet kit

Arrived in a well protected box with foam surrounding all included components. Color is a rich matte black for both faucet and drain. Box includes faucet with base ring, popup drain with mounting assembly and gaskets. Teflon tape and braided supply lines are also included. Faucet is an open waterfall design for a single hole installation. Clearly marked on the handle are hot and cold markings.

[Rewarded Review] Not good

I've installed a lot of sinks. This one has some of the worst instructions I've seen for a sink. And it's got non-standard pieces. I'm not a fan of that. I'm also not a fan of the way you hace to screw the got and cold into the faucet. It's hand tightening up inside there and as you twist the metal twists as well, which I think makes it less likely to last. Normally, the hot and cold are already connected if up inside the faucet. I was also not able to get the faucet completely tight so it didnt move. I used a wrench on the plastic, whcih normally is a bad idea. But the option was a faucet that twists or not. In the end, it looks nice, isn't super secure and I'm not at all a fan. But it works. I would not recommend it.

+1 more

[Rewarded Review] Bath Faucet that will user to install supply lines into body of faucet.

This single hole bath faucet will need to have the supply hoses installed into the body of the faucet. I am not able to get any tool into the confined space of the body to ensure a tight connection. I am only able to twist the supply hose to seat the O Ring at the end of the fitting, so I am giving them 4 stars. I seem to have these sufficiently tight and does not leak. The rest of the body is well built on a brass base and finished in a brushed nickel.

+3 more