Love this faucet

This faucet has exceeded my expectations. It is very sharp looking!

I liked the look but it does splash too much and water dries up on it and causes water spots. I was going to return it but dropped it on carpet and the handle broke off so I couldn't return it.

[Rewarded Review] Sleek option to upgrade your sink

This is a really nice and sleek faucet, the only thing is I feel it is too taĺl for a small sink or a sink that small children use. Other than that, it is a nice way to upgrade your bathroom sink!

[Rewarded Review] Absolutely love this faucet!

We used this in our guest bathroom and we are so excited to use it. This faucet added a touch of beauty and will pull the room together. It’s easy to install and the design is amazing. Highly, highly recommend!!

+1 more

[Rewarded Review] Matte black faucet with great water pressure

Needed to replace my bathroom faucet because the metal was oxidizing and didn’t look great anymore. This matte black faucet was a great replacement.

+1 more

[Rewarded Review] Down and Dirty work

I do a lot of work on dirty things like cars, motorcycles ,lawnmowers ,gardening and whatnot. It was difficult to turn the bathroom faucet on and off and to adjust the temperature and flow without making a big mess. So I decided to get a different faucet that would be more hands free.

+3 more

[Rewarded Review] Good product

Nice color ,easy to install,no additional parts required for installation,didn’t come with a drain assembly,need to purchase separately,also my vanity top is traditional 3 hole,this faucet is center mount and was too large ,had to drill out hole to make bigger,no big deal.

Good faucet

The faucet looks sleek. It is easy to install. The directions are not very good though if you’ve never installed a faucet before might be above average difficulty.

+1 more

Have to return this item due to the water lines being too small

Good looking faucet, nice finish and easy install

This faucet was used in our 1/2 bath, was easy to install and the black finish was of good quality. Faucet is designed to work with a single hole vanity

Heavy Flow

This review is for the BWE matte black single hole single handle bathroom sink faucet with deck plate (Model #A-96021B-SS). The single handle rectangular faucet stands tall in my bathroom sink. This is exactly what I expected and needed since my basin is a little small and felt cramped with the old standard faucet (see image). The black color brought a splash of modern elegance to my bathroom. I really like the flat color appearance and the fact that it is 304 stainless steel is a plus when it comes to corrosion resistance. The high arc waterfall spout is very sleek, the actual quantity of water is a bit much for my small basin and when the faucet is opened all the way water splashes out of the basin. I’m sure if you have a vessel style or a deeper sink that won’t be an issue for you. My fix is to not open the valve all the way. Half is more than enough flow for me. The faucet comes complete with everything you need to pull off a quick installation. This is assuming your angle stop valves work at the wall. Mine had to be replaced and that was a bit more work than expected. Otherwise, the faucet can be installed with a single hole or using the deck plate (like I did) to cover up the old (4”) three-hole faucet I replaced. The 24” long supply hoses that come attached to the faucet and have a standard 3/8” fitting on the end to attach to your stop valves. The deck plate & faucet have rubber backing at the base to prevent any leakage from the sink top. Of course, you can use plumbers putty or silicone if you want an extra bit of assurance. This faucet does not come with a drain so be sure to buy yourself a pop-up drain separately. Following the faucet removal, I first disassembled the faucet mounting pipe and jam nut so I could secure the water supply lines to the base of the faucet. No need to torque these down. Each hose has an o-ring so just snug them up and your good to go. After re-installing the mounting pipe to the bottom of the faucet, I set the deck plate over the three holes so I could slip the supply lines for the faucet through the single hole of the deck plate. Once the faucet is set slide the washer and backing over the mounting pipe under the sink onto the faucet body. Then use the single mounting nut to tighten the faucet to the sink top. I found that getting the nut somewhat tight with my fingers then using a basin wrench to add a final snug was the best installation method. Don’t overtighten the mounting nut, it is plastic and will strip easily. During this process be sure to check to make sure your deck plate and faucet are lining up properly as they may move a bit as you snug things down. Once this step was completed, I secured the hot and cold-water lines to their appropriate valves. One note here is to pay attention to the supply lines as you tighten the nuts. If you’re not careful you can twist the water lines and cause a flow restriction. All in this took me an hour to install because I had to turn the water system off entirely and cut the copper to install new angle stop valves under the sink. Otherwise, this is an easy installation of about 30 minutes. There isn’t much to this faucet and I expect that if I ever have a problem with it I wont be making a repair but rather a complete replacement. It isn’t very heavy overall and the components for installation are a bit thin, like the mounting pipe for example. This combined with the heavy flow didn’t leave me overly impressed with the product overall, but it works just fine.

+3 more

Looks wonderful with some flaws

We used this in our powder room on the first floor. Love the black matte finish and the squared off look. We installed this on a small vanity sink.

Nice and co

It’s really nice and non expensive so you don’t have to spend over 100$ good quality too

Great faucet

Loved the faucet. Very nicely packaged. I was very sad that they didn’t fit my sink. S

Okay, but not great quality

I bought this after trying a better quality almost identical design. The bottom of the faucet, the large fitting that has to go through the hole in the sink is too big for my sink. I bought this faucet after watching the assembly video....which is NOT this faucet. My bad for not paying attention to the picture. Even if it would have fit my sink, I wouldn't have kept it. It's very lightweight and not great quality. It's going back and I will try again.

SLEEK MODERN LOOK !

I'm a fan of single-type faucets because they occupy less space, which is perfect for smaller vanity countertops. This faucet boasts a lovely matte black finish and feels substantial and solid. However, I've noticed that with all matte finish faucets, it's essential to use a mild cleaner as bleach can eventually dull the finish. Nonetheless, it's a highly attractive, modern-looking faucet. I have a similar model in one of my other bathrooms, and it's performing admirably while maintaining its finish. Having a water softening system in your home, like we do, is always beneficial as it helps prolong the lifespan and appearance of all your faucets.

Great Looking Waterfall Faucet

Great Looking Waterfall Faucet. The BWE waterfall faucet epitomizes luxury and sophistication. Its exquisite appearance and impeccable performance elevate the ambiance of any bathroom, delivering a high-end aesthetic that surpasses expectations.

Plastic spout

Will be returning. Material stated stainless in description, but the spout is thin plastic.

Beautiful piece but it didn't fit in my bathroom vanity.

Love the look and the way the water flows.

I really like the brushed nickel and style of this faucet.