Just didn't fit the needs of the project I was working on. Kept it for a possible future project

Square Clamp kit

Just testet in to see how it work and found it very useful to support board upright when building e.g. a box.

This clamp kit is probably really good for picture frames, symmetric lumber projects… I was hoping to use for handrail return 90 degree clamping but due to the shape of my handrails and size it was ineffective…

Easy, one man operation to clamp stuff to glue &...

Easy, one man operation to clamp stuff to glue & screw together.

Produkt otrzymany jest zgodny z opisem. Niestety, przy dużych (długich) elementach montowanych

Nie warty tej ceny. Jakość wykonania i rozwiązania technicznego na max 80 zl.

[Rewarded Review] Very easy to use. Time will tell if the plastic is durable.

These are pretty simple to use. The material is secure at a 90 degree angle and clamped well. These are useful for picture frames, face frames, and similar smaller stock. They are plastic so not for big, heavy projects but they are padded so they don't mark up the wood. There are spacers included which are the same thickness as the clamps to hold the free end of your project level.

[Rewarded Review] Nice multifunctional square clamp kit

Nice multifunctional square clamp kit From MilesCraft. The clamps have a rubber pad that securely holds two pieces together at right angles for assembly. It also includes two clamp supports that help to keep your project level. Can be used for all sorts of projects such as panels, cabinets, furniture, picture framing, etc. Overall, each side of the clamp measures 8x8 inches. Very simple to use and stores nicely.

[Rewarded Review] Very Useful, Well thought out square clamp kit

I am using these to hold the top/side or bottom/side of some cabinets I am building for a “drop zone” near the door between our garage and the house. It took a few minutes to figure out how to use the set, but once I figured it out, these clamps do the job well. I no longer need an assistant. The square corner piece uses a dovetail with a track to slide onto the square. There is a steel ball that must have a spring behind it that presses the square against the track to remove any wobble. Next make sure the handles of the clamps are in the full vertical position then, with one hand near the bottom of the sliding part of the clamp and the other on the end of the clamp, slide the clamp close to its final position. The person in the video slides the clamp with one finger, but the clamps I receive don’t slide that easily. He must be holding the clamp very firmly between his thumb and 2nd finger and pushing hard with his index finger. Next, Insert the board, setting the far end on one of the clamp supports to keep it level (as shown in Figure 2 on Page 3 of the instructions), and push the clamp handle down to horizontal. The clamp has a cam action that will snug it up to hold the board firmly in place. The jaw has a rubber-like pad that presses on the board to keep it in place without marring the surface. This set can be used to make a ”T” or a corner or you can buy additional set(s) to make all 4 of the corners of a square at the same time.The clamp supports can be attached to the underside of the square piece as shown in Figure 1 on Page 3 of the instructions, but I think the holes in the square piece were added for people using this square with Milescraft’s metal clamps.. The clamps in this set don’t wobble so I use the clamp supports to hold the far end of my boards. The clamps can be also used without the square piece to hold a shelf vertically while adding edge banding. The square piece can also be used in tight spaces with smaller clamps.

+2 more

[Rewarded Review] I have wanted a good 90 degree clamp for awhile and this does the job but is not heavy duty.

This clamp is really great for joining woods of various thickness together but does really well with standard 1/2" to 1" thick wood and with furniture, cabinets, etc. The clamps are strong and fairly easy to use but the 90 degree brace is a bit flimsy and your hands may be needed prior to screwing any joints together. This is meant for light work. The clamp jig can can be fixed to a work bench but also has supports. The clamps are very easy to use. This 90 degree clamp is made in China.

[Rewarded Review] Functional but a bit balky

This Milescraft square clamp kit does a nice job of holding any two pieces together at 90 degrees for clamping, gluing and/or screwing. It comes with a couple of extra pieces to hold your workpieces level all the way to the end, not allowing them to drift.

[Rewarded Review] Holds Tight With Ease

Milescraft Square Clamp Kit. This kit will handle one corner at a time. If you want to handle multiple corners at once, you'll need multiple kits. The "clamp" part of the kit holds your workpiece tightly by pushing the clamp against your workpiece and then pressing down the handle. Easily done. You can them screw or nail the pieces in place. The square gives you an accurate 90 degrees to judge the accuracy of a 45 degree cut for projects like picture frames, etc. With taller boards, (90 degree connection), the clamp hold the board in line but you need another clamp for the top of the board. With just this clamp, there is no end pressure to bring the two workpieces together. A normal clamp will work fine for this. Overall a good addition to your woodworking tools.

+3 more

[Rewarded Review] Very sturdy corner clamp

I am in the process of building a sewing cabinet that needs to be very square. I have had smaller corner clamps but I have never been pleased with the quality of right angle that they produce. This clamp makes very nice corners due to the length of the plastic corner piece. Much better than a smaller clamp. In addition, the sliding and toggle action of this clamp is a lot quicker to lock than the old style screw clamp. The only issue with this clamp is that it is mainly designed to hold something like a picture frame that is open top to bottom. This cabinet has a closed bottom so I had to use the clamp upside down since there was no way to put it under the frame. Not a real problem just took some adjusting.

+1 more

[Rewarded Review] This Milescraft Square Clam Kit does it all!

This 5 piece Milescraft 90°SquareClampKit is a great 3rd hand when you need to hold 2 pieces of wood together at a 90° angle. It enables you to hold a screw and a screw gun in order to place a screw in the joint to make a tight joint. It includes pads to prevent clamp marks on your project. This kit can be used for making picture frames, cabinets, anything needing a 90° corner. What a great tool to add to your workshop!

+2 more

[Rewarded Review] Great for Light Duty Clamping of 90-Degree Joints

If you make picture frames or need to make perfect 90-degree corners for shelving or trim pieces, the Milescraft 90-Degree Square Clamp Kit is ideal. Included in this kit are an 8" x 8" fence, 2 cam lever clamps and 2 clamp supports. Making perfectly aligned corners takes little effort and the results are very clean. Multiple clamp styles can be used with this kit for alignment of larger pieces.

[Rewarded Review] Handy clamp for joining boards to prep glue-up...

Milescraft SquareClamp Kit 90-Degree Kit (5-Piece) is a clamp/jig for setting up boards for a 90 degree join. It is primarily a corner piece and four other components to hold the boards for joining. The other members besides the 8” square piece are two adjustable clamps to the hold boards with maximum clamping thickness 3 ½ – inches and two board risers so they don't sag along the length. It's helpful if you examine the photo's as to what's going on. This jig is a helpful assist if you do a lot of corner joining. The parts are made of stiff plastic-like material and can also be used with your own clamps, too and the 8” square piece. A note attached to the clamps is not to over-tighten it. If it isn't working to your satisfaction, check that the boards might not be square on all sides from my experience. You don't need overwhelming force to tighten boards for gluing. I see using this clamp/jig for smaller quick glue-ups. Milescraft has been around for a while, have several of their tools in my workshop. It's another one that will come in handy when used within its capability.

+3 more

SquareClampKit

I purchased this to hold corners together so I could drive brad nails. The parts are well made and are sturdy. This is a quality product. The design is pretty good. My only issue with this product is the ease of alignment of the work pieces. You have to do the old "back and forth" trick in order to get the two pieces you are aligning to stay where you want them. Once you have them where you want them, they stay in place.

This is a really good tool, simple but useful. Higly...

This is a really good tool, simple but useful. Higly recommended.

Clamps work well, require some practice before results are...

Clamps work well, require some practice before results are satisfactory.

Just a great product. I use them for cabinet assy....

Just a great product. I use them for cabinet assy. My 1st to go to clamping system. I also purchased the 8” clamp set. They are at the easiest place to get to because I use them much.