The Nuvo 60 Degree Integrated LED landscape metal light warm up the space around my fountain. The installation was easy. Photos will be added later.

Easy to install, we got 9 of them to light up a landscaping island we have at the entrance of the complex. really happy with them.

Island Directional sign

Works perfect to light up our Directional sign

First time ordering online here at Bee's and everything went smoothly. The lights arrived on time and work great. Thanks

Excellent quality, easy to install

Outdoor landscape - driveway lighting East to mount on in -ground device

Exact size I wanted and with the LED

Likes: Excellent replacement lighting. Switched to LED lights as the 120V/50 watt were too hot an...

Likes: Excellent replacement lighting. Switched to LED lights as the 120V/50 watt were too hot and used too much electricity. Now the bushes do not burn. Easy to install. YES YOU MUST BE CAREFUL WITH THE NECK AS IT IS THE WEAKEST PART AND WILL BREAK. THAT IS WHY YOU PROBABLY HAD TO REPLACE THE LIGHT IN THE FIRST PLACE. No so good: O-ring broke and lucky as I used the old O-ring. Is it possible to get additional rings. Tried to look up but no luck at this point. Thank you for a good product. I replaced 3 of 4 lights.

These lights are nice....until you have to try and replace the Par20 bulb. I can't tell you how m...

These lights are nice....until you have to try and replace the Par20 bulb. I can't tell you how many bulbs I've broken and how many of these lights I've snapped at the base trying to remove the bulb. I had 3 of these light fixtures I was using as spare parts because: 1. The base would break, the seal to replace the lights would not be water tight and/or the bulb couldn't be removed. I finally went to an LED alternative and so glad that I did!

4-stars for the price 3- stars quality material Cons the way to remove the lenses no screws just ...

4-stars for the price 3- stars quality material Cons the way to remove the lenses no screws just pull and jiggle left right left right With a little patience it will come out I recommend to put a non Petrolium grease to be able to remove easier and lubricate the gaskets. If you dont do that its very hard to remove the lens cover. 4-stars for the value even if I mentioned The cons, still for around $18. Its well worth it. But Time will tell.

... and if you do (as I sadly did not) and if you also are sold a unit with an incorrectly, crook...

... and if you do (as I sadly did not) and if you also are sold a unit with an incorrectly, crookedly installed light bulb socket (as I most assuredly was) then you will be in a position to just return the p.o.c. you were sent and hope for a better-crafted replacement without having to take down, un-wire, disassemble, and then do the return dance. I was, finally, able to make the darned thing work, but it would have been SOOOOO much better if the manufacturer had just simply had SOME quality control in the process.

Haven't installed but look good, around fountain

Haven't installed but look good, around fountain

Nuvo 6 Watt LED Floodlight

I had a hard time finding a low wattage bullet style LED that had a warm light. I do not like the often too-bright light that LEDs generally give off, This Nuvo light provides a warmer light available in several different wattages. I installed several of them to wash a wall with a soft, yellow glow.

You get what you pay for. Looks good but here are the real issues. Base breaks off extremely easi...

You get what you pay for. Looks good but here are the real issues. Base breaks off extremely easily. Bought 12 fixtures and half of the bases have broken off while applying the slightest pressure to adjust the angle of the fixtures. The lamps are impossible to replace as you can not get a grip on the lamp to unscrew. Nine (9) of the fixtures have leaked and filled with water. The bulbs were rusted in place and the light fixtures permanently damaged. The water eventually made it into the junction box and down the conduit. A lot of work to remove the damaged fixtures and vacuum out the water from the boxes and conduit. The covers are extremely difficult to remove and once you do they will never again fit tightly. This is what I got for trying to save some money by buying these fixtures. After a year I've had to replace them all. So I wasted the money for the 12 fixtures and 12 LED bulbs that are damaged due to water entering the fixtures. DO NOT PURCHASE THIS PRODUCT. Less

Decent outdoor head. Nice thread depth which allows for a gasket and locknut and good angle adjus...

Decent outdoor head. Nice thread depth which allows for a gasket and locknut and good angle adjustment. It helps to put a little silicon grease on the o-ring. I discovered that the cover is easy to get off if you just pull out and down (kind of like breaking open a shotgun), instead of twisting and pulling straight out. Either a par20 or R20 fit fine. Like all sealed fixtures of this type the bulb is hard to grasp with the fingers to twist in or out. I like to get some blue painter's tape or duct tape and make a " T" shape out of it with the tape stuck to itself forming the vertical part and the top of the "T" being the sticky side of the tape which I stick to the face of the bulb. Makes it real easy! It is a sealed unit, so LED bulbs don't have the longest lifespan in it. I need to use halogens, so it works great. Less

I bought 4 of these units. 3 of the 4 units function well overall. 1 of the 4 has a similar probl...

I bought 4 of these units. 3 of the 4 units function well overall. 1 of the 4 has a similar problem that others have experienced - the cover is difficult to remove. After great effort, I was finally able to remove it, after having tried rubber strap wrenches, screwdrivers, and rubber gloves. When reattaching it, I put a generous coating of silicone lubricant in hopes that it would come off more easily if I had to ever open it again. However, when I wanted to change the light bulb for a brighter one, I was unable to remove the cover despite my efforts using the same tools I used the first time. I think there is a bad batch with difficult to remove covers.

I really like these lights. The shroud is difficult to get off as previous comments indicate. Aft...

I really like these lights. The shroud is difficult to get off as previous comments indicate. After damaging several of these units, I finally found a solution to removing / separating the cowl (lens portion) without damaging the base (bulb portion). The short answer is two 6" strap wrenches, one on the cowl and one on the base. Here's some tips that I discovered: 1. Before the first time you push the cowl into the bases, wearing a latex or silicone glove, spread a generous bead of silicone "O-Ring" lubricant around the two o-rings on the cowl. This will make it easier to insert the cowl, and make it easier to separate them when the bulb burns out. When you insert the cowl into the base, excess grease will come out. Wipe it off with a rag, but be aware that more will seep out over time and you will end up with a strip around the crease between the two pieces. Its worth having the stripe. 2. To remove the cowl from the base, a) position the first strap wrench oriented so you're pulling backwards towards you to engage the wrench, but dont pull it yet. (I use Par 38 housings so 4" won't fit. 4" might be good for par 30 or par 20). b) Position the strap just behind crease. c) Position the other strap wrench oriented so youre pushing away from your body to engage the wrench. Put it as close to the crease between the cowl and base as possible without covering it. Now, each strap wrench should be on either side of the crease. d) If you have a helper, have him steady the base as you move to the next step. e) Push the handle of the wrench forward away from your body and use the same amount of force to pull the wrench on the base towards your body. Using equal amounts of pressure at the same time will stop the lamp from moving and cracking the mounting rod. f) Once you get the cowl to let go of the base, keep pushing but start to add some outward angle to slowly pull the cowl from the base as youre turning. Continue to apply equal pressure to the base handle that youre pulling. The o-ring grease should be helping you push to turn and angle away from the base. g) place the cowl with the lens down on a clean flat surface, so dirt doesnt get on the o-rings. h) Change the bulb. i) wearing a silicone or latex glove, put another generous bead of o-ring grease all the way around the o-rings. Repeat the above as necessary. Its worth going through this because Ive never found a better waterproof Par 38 lamp holder. Less

I have purchased several of these lights through the years. I have been using these lights for ab...

I have purchased several of these lights through the years. I have been using these lights for about 5 years. I will tell you that after about 3 years of use they tend to crack and break at the seam of where you screw the fixture in. I really like the look of the lights and they are fairly inexpensive for what you get. Overall, I am happy with the lights. I have not been able to find anything I like better. I just replace them every few years when they break. 4 stars because I like them, but they are not as durable as I would prefer. They will only last a couple of years in the hot Texas sun, but for the price I can replace them every few years. I will continue to purchase these lights.

too small for application needed

too small for application needed

These lights are an amazing value. I don't know how they can sell them for this price. They are h...

These lights are an amazing value. I don't know how they can sell them for this price. They are heavy gauge metal. They accommodate a standard LED bulb so you may not have to change bulbs for years. They are very waterproof with double rubber O rings (use petroleum jelly for further seal assurance). If you are placing them in the ground it would be best to buy a chamber kit, to go below grade, to keep the junctions high and dry.You may have to spray joint with WD40 to open the light bulb chamber the 1st time. They may be listed as bronze but they read as black. Be sure to check the dimensions of the light. I assumed they would be small and unobtrusive because of the price but they are large which is fine with me.

This product is about what you would expect for the price. Design is basic and not much thought h...

This product is about what you would expect for the price. Design is basic and not much thought has gone into the use, maintenance or lamp replacement. Having a pressure held lens without a fastener will most likely lead to damage when eventually trying to replace the lamps as the knuckles are not all that well constructed.Also there is not enough room to grab the perimeter of the lamp to remove or install the lamp so its useful life expectation will be short.