Sliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 3/8 and 1/2 in. Offset Pairs (Set of 2)
Reviewers mentioned
See 20 reviewsLength | 3.81 in |
Depth | 1.05 in |
Reviewers mentioned
See 20 reviewsSliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 3/8 and 1/2 in. Offset Pairs (Set of 2)
Store | |
---|---|
Amazon Prime-Line N 7533 Sliding Closet Door Roller Kit, 3/4 In. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 3/8 and 1/2 In. Offset Pairs (2 Pack) | $1.86 as of 12:14 01/20 |
Lowe's | $9.29 |
Wayfair Sliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 3/8 and 1/2 in. Offset Pairs (Set of 2) | $12.73 |
eBay | $12.78 |
Zoro | $14.38 |
Length | 3.81 in |
Depth | 1.05 in |
More like this product
View allMore Door Hardware
Reviews
[Rewarded Review]
They are a little smaller than the original ones, but I think I can make them work.
[Rewarded Review] Smooth wheels
Good quality. I replaced my closet sliding door wheels with these. Wow! The doors are sliding very smoothly.
For Closet Bypass Doors Needed Maguyver Move
Since my tracks are parallel I had ro reverse the wheels on the front door to properly install the bracket on the back side of the door so the wheels faced the same direction as the back door to hang the front door. Very confusing as the directions show the same type of track. Maybe these are for shower doors? I don’t know but I made it work. It was hard to find a set with these smaller 3/4” wheels and the right offset so I had to make it work. I didn’t want to replace the whole kit and kaboodle! (That’s track and rollers for those who’ve never heard that term)
I fixed my closet doors as soon as I received this pair of rollers.
It worked wasn’t exactly the same but it did work.
Works on Hanging-style Sliding Shower Doors
You can use these on the hanging-style sliding shower doors (popular in the bathrooms of houses built in the 1970s and 80s). 1. Carefully remove the hanging door assemblies from their tracks and safely position for accessing the top. 2. Take off the screw holding the new polymer wheel to the frame piece; keep the hardware. 3. Noting which hole was used, remove the old wheel and hardware from the shower door frame top. 4. Replace with the new wheel and hardware. 5. Repeat the process for the other three (3) wheels of the set. 6. While you are at it, clean out the accumulated grime and debris from the track channel before carefully rehanging the doors in the track. It is a pretty simple process. "Works good; lasts long time."
Shower door wheels
These are not specifically for shower doors but they worked for me !
Shower door rollers
I was able to remove the actual roller part of these pieces and attach them to the already installed holders on my shower doors - they worked great!
Not properly made
Replaced old rollers on sliding closet doors with those set. They are the only ones I could find that would fit the original track. The back set fit great, the front set was not manufactured with the right offset. Had to put the roller on the other side of brackets just to get the door to fit. The downfall to doing this is that the door is off balance and doesn’t slide as easily as the rear door.
[Rewarded Review] Prime Line Door mounts
Super easy to replace the old door mounts. Roll smoothly works perfectly.
[Rewarded Review] Works as advertised.
These were easy to install and work well. They are fairly robust but metal rollers would have been better
[Rewarded Review] Great item I needed for a DIY project
Needed a set of rollers to fix a kitchen drawer that was dragging. The rollers raised the bottom of the drawer and made it open and close easily and smoothly.
[Rewarded Review] wheeling again
hard to find wheels made easy by Lowe's supplier...
[Rewarded Review] Sliding Rollers
The Sliding Rollers were a life save for my kids shower sliding glass. They work great.
[Rewarded Review] rollers
deffently a great find and they worked as they should have.
[Rewarded Review] Rollers
This item works well if you have a rail for them to roll in. Worked great for a door I made to separate 2 rooms inside my well pump house.
[Rewarded Review] Door-Mount Sliding Closet Door Roller
I was surprised that I was able to find these. They worked/fit perfect. Lowes did it for me once again. It is nice to know that just about every time I need something pertaining to home repair, I can count on Lowes to have it.
[Rewarded Review] Rollers for Shutter
Perfect little rollers for any sliding door or cabinetry piece.
[Rewarded Review] Great product
Excellent description, it worked exactly as described.
Sliding screen door roller brackets
Rollers were too big to fit in track. Could not use them, returned.
Customer pictures
Overview
This is the lowest price we've seen, typically ranging from $6 to $15.
Sliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 3/8 and 1/2 in. Offset Pairs (Set of 2) at Wayfair
,Prime-Line Loop Latch, 2 Pack, Steel & Plastic, 2 Pieces at Walmart
,Prime-Line N 7533 Sliding Closet Door Roller Kit, 3/4 In. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction, Includes 3/8 and 1/2 In. Offset Pairs (2 Pack) at Amazon
.Description
Upgrade your closet doors with this durable sliding door roller kit. Featuring stamped steel brackets and plastic wheels, it ensures smooth operation. Perfect for front and rear sliding panels with 3/8 and 1/2 inch offsets.