Techtonic Electric 3 Arm Monitor Mount Standing Desk - Sit to Stand Desk Converter with Keyboard Tray – Black – Stand Steady
Reviewers mentioned
See 24 reviewsReviewers mentioned
See 24 reviewsTechtonic Electric 3 Arm Monitor Mount Standing Desk - Sit to Stand Desk Converter with Keyboard Tray – Black – Stand Steady
Store | |
---|---|
Target Techtonic Electric 3 Arm Monitor Mount Standing Desk - Sit to Stand Desk Converter with Keyboard Tray – Black – Stand Steady | $549.99 |
Walmart Stand Steady Techtonic | Electric Standing Desk Converter with 3 Monitor Mounts | Ergonomic Stand Up Desk Converter with Keyboard Tray Holds 3 Screens | Easy & Quiet Sit to Stand at Push of a Button | $549.99 |
Amazon Stand Steady Techtonic Electric Standing Desk Converter with Triple Monitor Mount, 3 Screen Support, Quiet Sit-Stand Desk with Button Control, Keyboard Tray, Ideal for Gaming & Computer Work (Black) | $549.99 as of 22:47 11/23 |
More like this product
View allMore Desks
Reviews
Died within a year
Best fit for my needs as far as space and monitors supported. However, I sat at the desk today, and suddenly the raise/lower function is not working any longer, less than a year after purchase.
Good try
My office standardized on these as their standing desk. It has 3 major issues1) Most of them do not lower flat down to the desk so they bounce when you type. The solution to this is to put a new pad of postits under each of the front corners.2) There is no cable routing built in. I have seen people in the office get their wires impinged.3) When using this desk the monitors are way to close. When you look at the unit it looks as if you should be able to bend the arm The only way to move them back is to push them back and away from each other. This means the monitors are 4-5" apart.That said the desk does go up and down and is electric.
Perfect solution
Delivery was as promised! Assembled on a Saturday - took a bit but fairly simple if you can follow directions. Sturdy and easy to operate! Love, love , love it!!!
Perfect for my uses ...1.
Perfect for my uses ...1. longhand, 2.standing iPad, 3.Quirky keyboard to iMac, 4. Reading newspaper, 5. Doing numerical calculations by hand, and 6. Drafting a land plan by hand in pencil, (many erasures necessary).
Fantastic. Easy to use. Could
Fantastic. Easy to use. Could be better packaged when sending out. Corner was damaged by someone dragging box across pavement.
Draftsman/ Engineer Tech
The desk is great until the control box goes out and you can't buy parts to fix it, without buying a new desk.
Overall very good
Everything is great but the one thing that needs improvement is the piece that tilts the monitor needs to be able to tighten and lock in place. I had a single monitor holder that had this capability. Otherwise everything else is great, but one star off for that missing functionality.
very good quality product! I
very good quality product! I wish that it could hold larger monitors; but they were clear about the sizes when I ordered it.
Relief
Help to reduce back pain during work. I would definitely recommend this product
great!
great!
Fast delivery and great product
Fast delivery and great product
A few fine tweaks
The overall product is good but the two spots where I see areas for improvement are the following:The screen mounts do not hang even so if you are like me, it drives you nuts for the first few days when the screens aren't level acrossAlso, there is alittle give in the large surface, even when its lowered all of the way down.Besides those two things it is a good alternative to having to put a large electric standing desk.
Perfect!
Perfect!
Great standing desk.
Great standing desk.
Great Standing Desk Converter with some assembly challenges
I read a lot of reviews for this standing desk converter before deciding to purchase, and there were a lot of contradictory opinions about it. Ultimately it was the product that best suited my needs as far as the number of monitors, the size and configuration, and the weight it could support. I specifically wanted a product that had the keyboard tray as well as the additional shelf above for other desk items. This design works well and there is a lot of space that you can utilize. I also wanted the height adjustment to electric, as I knew raising or lowering the desktop with all of the heavy equipment I planned to put on it could become cumbersome manually. The motor is quiet, quick, and offers a wide range of desktop heights. I saw a lot of users complain that there was no option to store preset height adjustments, but this isn’t an issue for me. Just press the button until the desktop is at the height you want, and then let it go. The biggest challenges I faced with the product was assembly. This unit is heavy, and that’s not necessarily a bad thing. It does make it complicated to assemble on your own, however, which is what I did. If possible, try to have help when assembling because this would be much easier with two people. I ran into a problem where the motor unit wouldn’t fit into the base so that the screw holes aligned correctly. I eventually figured out this was because there is a plastic cover on the bottom of the motor housing that has slots and tabs to hold it in place, but on my particular unit the tabs didn’t line up correctly so the plastic protruded below where it should have. I was able to resolve this by snipping off the two tabs that were a problem. The other tabs still held the plastic piece in place, and once I did this the base and motor screw holes lined up correctly. The next problem was attaching the monitor arm to the post that raises and lowers the desktop. The arm is heavy, which makes it very sturdy, and it also has rubber gaskets that allow it to fit on the post very tightly. This was a real challenge to get on the post and tighten securely on my own. The first time I attached it I thought it was secure and proceeded with installing the monitors, only to have the whole thing give way and drop down the post with the monitors attached. Turns out the bracket hadn’t been completely flush against the post and the tightening screw on one side was much tighter than the other so the weight was unbalanced. Thankfully, nothing was damaged, but it took a while to figure out how to raise the monitor arm back up and support it so that I could loosen it and re-tighten the bracket securely by myself. I ended up using the monitor stands I had removed from the monitors to support the monitor arm so I could make sure the bracket was flush and tightened equally between the two adjustment screws. Once it was reinstalled the monitor arm is very secure against the post and doesn’t give at all. Finally, the last challenge was with the Versa mounts for the monitors. I saw a lot of complaints in the reviews I read about the mounts being too large for the inset on the monitors. When I first tried to install my monitors I experienced what I thought was the same issue. In reality, I don’t think it’s an issue with the size of the mount, so much as needing to be certain that the monitor is aligned very precisely. The mounts fit VERY tightly in the insets on the back panels, but I think that’s probably by design. It took some effort to get the monitor to sit on the mount and align correctly so each corner fit into the inset, but when it did the mount supported the monitors on its own, allowing me to put the screws in without also trying to hold the monitors to the mount. The tilt adjustments on the verse amounts were also very stiff at first, but I figured out that turning the whole mount counterclockwise loosened them up so that I could adjust them easily. Overall, I am very satisfied with the product and think it will meet my needs well. I think the assembly process would have gone smoother with more detailed instructions, but I was still able to figure out and resolve all the issues I experienced. I’m very confident that this desk is sturdy enough to stand up to a lot of use, and that’s what I hope to get out of it. Less
easy set up
this was delivered very quickly. very easy to follow directions, very spacious and pleanty of room to set everything up on. great product.
Very Good
Well made and very stout. The up and down motion is very smooth and can be adjusted in fine increments. Package arrived very well packed and no damage at all. We highly recommend.
Draftsman/ Engineer Tech
The desk is great until the control box goes out and you can't buy parts to fix it, without buying a new desk.
Perfect solution
Delivery was as promised! Assembled on a Saturday - took a bit but fairly simple if you can follow directions.Sturdy and easy to operate! Love, love , love it!!!
I suffer from back pain.
I suffer from back pain. I work in the accounting department and need a lot of space to spread out. This desk works wonderfully!
Customer pictures
Overview
Techtonic Electric 3 Arm Monitor Mount Standing Desk - Sit to Stand Desk Converter with Keyboard Tray – Black – Stand Steady at Target
,Stand Steady Techtonic | Electric Standing Desk Converter with 3 Monitor Mounts | Ergonomic Stand Up Desk Converter with Keyboard Tray Holds 3 Screens | Easy & Quiet Sit to Stand at Push of a Button at Walmart
,Stand Steady Techtonic Electric Standing Desk Converter with Triple Monitor Mount, 3 Screen Support, Quiet Sit-Stand Desk with Button Control, Keyboard Tray, Ideal for Gaming & Computer Work (Black) at Amazon
.Description
Elevate your workspace with the Techtonic Triple Monitor Electric Standing Desk Converter. Effortlessly transition from sitting to standing with a quiet, button-operated adjustment. Designed for stability and featuring a spacious keyboard shelf, this converter supports triple monitor setups, aligning screens at eye level to reduce neck strain. Perfect for gaming or computer work, it fits atop any desk or table, offering a space-efficient solution for any setup.