Heads stripped as soon as it met resistance, even with pre drilled pilot holes. Not sure if the paint didn’t cause the bit to sit correctly but I wouldn’t recommend these

I bought these because they had a white head. I used them to install 1" thick Alum panels to my garage walls. They worked great for what I was using them for, however some of them would break off if I hit something.

White locker cabinet

Used the screws on an open cabinet for a customer. White screws blended with the white cabinet to make an excellent visual display.

Blended in with cabinet connections; we pre-drill to avoid spli....

Blended in with cabinet connections; we pre-drill to avoid spli.

These screws are just ok. They snap fairly easy compared to the similar gold screws. If you not concerned about color, go for the gold. If you are, be careful.

Sheared off every single one used, do not recommend

These are cabinet screws and I bought them to use them in cabinets. I predrilled my holes, yet every single screw I tried to install sheared off while screwing them in with an impact driver and the included bit. That left me with broken-off screws in my cabinet face frames with no reasonable way to extract them and set with a different screw. Super disappointed in this produt. Dont wase your money.

The tips of the bits break off with a little torque. Had to buy good bits to do the job. I will continue to use these screws though. They are perfect for joining cabinets together

I had two different impact drivers. I used different speeds. The heads stripped. Not worth the money!Better off putting white nail polish over better screws!

Great quality!

I had never installed cabinets and I wanted something easy and that would minimize risks of splitting the face frame. I did predrill, which is the safest bet. I love the square hit which keeps the driver from slipping.

They work great

Exactly what I needed to fasten my coalville cabinets to the wall. Had plenty of distance nailing straight to the studs although I had to buy for inch deck screws to toenail the top corners of the cabinets but the screws got good grip. It comes with a bit. That works fine and I have plenty of screws left over. Can't ask for more than that

These look great and they work great, too. I like the white finish because my cabinets are all white. It's not that critical, but a nice simple bonus. The head is non-slip and the tip is somewhat self-tapping.

These are good screws but packaging damaged along the way and package and contents placed in a plastic bag. Not going to count the screws to verify if count is correct. Items should be new in an unopened package unless otherwise stated.

Went to an orange store and these were out of stock. Ordered them here because I knew I'd get them faster. I use them to screw in fascia from the bottom. I know they're not outdoor screws but they don't get wet so I haven't had a problem with them. Put them on my house a couple years ago and they still look brand new. Using them on a rental property since they worked so well the first time.

These worked as expected. No issues. It's nice to have the right size for correct penetration int...

These worked as expected. No issues. It's nice to have the right size for correct penetration into the wall studs

I didn’t like these for my kitchen cabinets. They were...

I didn’t like these for my kitchen cabinets. They were way too soft and the star hole kept stripping. I would have to back the screw back out and try another one only to get the same result. I finally went to the store snd bought different screws.

GRK Fasteners # 8 x 2 1/2 in. white star...

GRK Fasteners # 8 x 2 1/2 in. white star drive low-profile Washer-Head Wood cabinet screw (80 pack) worked out just right for our needs. My husband needed extra screws to put up some plantation shutters.

Not happy this time. It seems that the metal quality...

Not happy this time. It seems that the metal quality has gone down. Heads strip out under low torque. Snapped a couple of them also under low torque on cabinet installation. Perhaps I just got a batch that got past factory quality control. I used these fasteners 5 years ago and they worked fine then, but not this time..

Even after drilling pilot holes the supplied bit got bent...

Even after drilling pilot holes the supplied bit got bent out of shape and the fastener heads stripped easily. These would not penetrate. A couple even broke in half inside the wood. They eventually got the job done but I found another brand that worked better.

WE Just got thru installing a Kitchen in a Hi...

WE Just got thru installing a Kitchen in a Hi rise Unlike any other screw we used in the past these are #8 were just the right size to bring the stiles together perfectly without splitting out the wood and making a mess, and the color was not a problem because it matched the cabinets. Great screws.

I have tested these white screws against the GRK gold colored ones. These break off sooner every time. Test was: Screw in to soft pine 3/4” block that was on top of a solid red oak block. The gold screws went deeper every time before snapping. I install cabinets and wondered why I suddenly was breaking a screw here and there.