Easy to install and they stay securely attached to the ceiling. Oh they last-I installed these over five years ago and not one has failed.

The lights are really easy to install and are a good looking product. Very bright light. This i...

The lights are really easy to install and are a good looking product. Very bright light. This is the 4th light I have installed in different areas of our home and all are the same look and output. We are very pleased with this product and would not hesitate to buy again.

Love these lights. Super easy to install and they provide...

Love these lights. Super easy to install and they provide great light and energy efficiency. Highly recommended

I need 6 more of the same lights, but you...

I need 6 more of the same lights, but you don’t have anymore. My job is incomplete, and I’m not going to put in different lights, I want them all to be the same

Easy up says it all. With the junction box and light all in one unit, there's no fuss mounting a ...

Easy up says it all. With the junction box and light all in one unit, there's no fuss mounting a box in the ceiling. Template for cutting the opening is provided. The super heavy duty spring clips ensure this light is staying put. These are mounted in the ceiling of our lanai, and they are bright. 5 brightness settings were offered, and we chose the middle one. Probably could have chosen 1 setting lower. Heavy duty, well constructed. Will be purchasing more for my garage.

I love these LED lights.

I installed this light in my sons room because his previous light wasn't bright enough and I am quite happy with the results. Personally I feel that this light is as bright as two 65 watt bulbs. As far as installation goes this light is a little harder to install than your average recessed LED light because this light is wider than your average light fixture but besides that this light is fairly easy to install and should take no more than 40 minutes of your time. One thing I would like to point out is that spring loaded clamps that hold the light in place can hurt your fingers if they manage to snap down on them, so watch out for them when you are installing the light.

Quality light

Bought 10 of these in December but just installing now. Nice design. Quality construction. Heavy-duty springs. Even included Wago 773 style push-in wire connectors are quality. Would have been 5 stars, but 10 I bought in December did not include air-tight gaskets like is mentioned in the current listing. Gaskets are needed.

This product is awesome. Extremely simple to wire up. Simple to install and looks and operates gr...

This product is awesome. Extremely simple to wire up. Simple to install and looks and operates great.

good but not great

So these lights look great but have some issues. 1. Like the other reviewer I had a hard time getting mine to stay up against the sheetrock. The spring is just to week. What I found helped is bringing in the romex thru the side NOT the top, also making sure there is no insulation or wire pushing down on the can even slightly. They are not airtight. It is not easy removing the knockouts I found that back and forth does not work great but rotating 360 works best. They dim nicely and I used them with a fiet smart dimmer. The light is good and they look nice if you can deal with these issues. Not minor issues either. Also, I had no luck contacting customer service but that could be due to the virus.

Good quality. Easy to install...

Good quality. Easy to install

So easy to install great product...

So easy to install great product

I installed 9 of the lights in a ceiling with an attic above with 15" of batt insulation. The sp...

I installed 9 of the lights in a ceiling with an attic above with 15" of batt insulation. The spring clips to hold the lights up do not work effectively, and the lights would sag down leaving a 1/8 - 1/4" gap. This was happening even after climbing into the attic and adjusting the insulation so it wasn't pressing down on the light. As suggested by another reviewer for the same line of lights, I needed to add some blocks (I cut up some 3/8" drywall) under the spring clips so they would stay tight to the ceiling. Even now, I still feel I may need to just caulk the lights to the ceiling down the road. Also, the junction box could have been a tiny bit bigger as it was very cramped with 3 wires in the box. Otherwise, the lights look good and work well. Using a Lutron TGCL-153PH-WH dimmer, they dim very low with no flickering or dropouts.

Great Lights easy install some tricky when on dimmers...

Great Lights easy install some tricky when on dimmers

The lights are super easy to install once the wiring and cut outs are done! I removed an light f...

The lights are super easy to install once the wiring and cut outs are done! I removed an light fixture that was there when we bought our house and used the same wiring for these. Straight forward installation. Lights look great, especially with a dimmer! The box is a bit tight for the cables, but the attached wire connectors make it easy to stuff them in there. I daisy chained 4 lights and they work perfect!

Great lighting, simple to install

Great lighting, simple to install

Great lights without the cans at a great price. Another feature is you can order from soft white ...

Great lights without the cans at a great price. Another feature is you can order from soft white to bright white. The junction box is mounted on top and is a tight fit for the wires if you're going to put ( 2 ) 14/2 WG wires to daisy chain them. What I did was drill my holes and pulled enough wire down through the ceiling and wired them up on a 3' high step stool in the kitchen then shoved the fixture back into the hole and the clips hold it in place. I placed 6 of these in my kitchen and have them on a LED dimmer switch .I just had to get up in the attic remove the insulation around where I was drilling the hole ( I used a 6 1/4" inch hole saw , A 6" hole would be a tight fit and you would have to notch out the holes where the wings go to make them expand. I think you could go to a max of a 6 3/8" hole any bigger might affect the holding power of the clips to hold firmly against the ceiling. ( Just my opinion ) The outside diameter of these fixtures is 7 1/2" . I have the old sheetrock and then plaster on top of that for a 3/4" thickness overall and it worked fine. I really didn't staple the wires to the joists in the attic to take out the slack , I did pull the insulation back and covered the top of the fixture because these don't heat up like the old incandescent lights, I figured down the road I might have to paint and pulling them back out would be easier instead of trying to paint around the fixture and worst yet to mask them off while painting.

Fast, simple install. Good instructions....

Fast, simple install. Good instructions.

Easy to install. Love it. ...

Easy to install. Love it.

Needed to resolve a problem with cold air coming into an enclosed breezeway that had recessed lig...

Needed to resolve a problem with cold air coming into an enclosed breezeway that had recessed lights in it, which were UL listed but not insulation contact rated. The originals required a 3" clearance around them to prevent heat build up and a potential fire hazard, which resulted in a way for cold air to enter the house through the fixture. These replacements were the perfect answer to fill the 6-1/4" void/hole of where the originals were located and allow contact with insulation installed behind them to stop the air flow and draft. I also added 3/8"Wx3/16"T foam weather stripping around the outside perimeter of the fixture to further seal the space between the ceiling and the fixture. Not only did these fixtures stop the cold air draft but also brightened up the room considerably.

+1 more

Easy to install. Well made and robust so it won’t...

Easy to install. Well made and robust so it won’t hang down because of inferior spring arms.