Plugs are standard tamper resistant- I purchased leviton wall plate...

Plugs are standard tamper resistant- I purchased leviton wall plate covers and the hole for the wall plate screw is about 1/32 off and does not line up without a little fight

Great Value for DIY

Good value compared to what was available at my local store. The tamper resistant function is not as hard to use as other receptacles I have purchased in the past. Easy to install. Time will tell how well they hold up but I’m impressed so far.

[Rewarded Review] A nice-looking decora outlet

I am finishing my basement and decided to try the faith outlets vs. the brand I typically use. Many common features such as UL Listed; back or side wire; tamper proof and 15 amp. The ten pack is packaged very well with each outlet individually wrapped. I only use the screws on the sides to attach the wiring so I can't comment on the slide in back wiring option. The color is very close to other brands so you could probably mix and match outlets and outlet cover brands but I opted to purchase the Faith outlet covers as well. I found the outlets fairly easy to install but had some difficulty with the outlet covers if the wall was not perfectly flat which seemed to be an issue with the outlet itself and the subplate that holds the cover in place.

[Rewarded Review] Decorator

I'm using the Faith Decorator Receptacles in my family room to upgrade all the outlets for a more modern look. When family visits with small children we wanted to eliminate any hazards by adding these tamper-resistant electrical outlets. The installation instructions provided are very helpful for someone with limited electrical experience. The covers on the slots don't interfere with plugging things in.

+1 more

[Rewarded Review] Good looking Decorator style residential receptacle

The Decorator style has a flat face with small prong guide ramps to make plugging in a little easier. Tamper resistant and features like a fast wiring point on each of the common and line screw terminals so you can electrically separate the sockets with two wires each for switching or keep them together with four wires each side. Fast wire points are not clamped by the screw terminals and the receptacle should be replaced if you release a fast wire connection as the spring may no long hold the wire properly to prevent overheating and fire. There is a strip length guage for the fast wiring strip length. The 10-pack box helps keep the cost of finishing my basement down while supporting the 15 Amp standard residential receptacle power.

+1 more

[Rewarded Review] Faith decorator receptacle.

I received the Faith decorator receptacle 15 amp 125-volt NEMA5-15R wall mount duplex outlet UL listed, white (10-Pack). We have been slowly replacing all the receptacle outlets in our house to these newer modern looking outlets. They really do look nicer than the older rounded ones. The white color pretty much matches everything. I have to get more cover plates for them.

[Rewarded Review] Tolerance issue?

As soon as this ten pack came through the door, my wife had plans for were she wanted them installed. Tired of our 1968 outlets, this gave us a cleaner, more modern look. The box includes ten individually wrapped dual plug receptacles which are tamper resistant and UL listed. Beyond the one sheet installation guild and 1 year warranty, you will need to supply wall plates. Visually these don't look all that different from other brands, it has 4 side terminals, 4 wire holes and ground screw. Installation was no different until half way through the project when one of wires would not fit into the wire hole. Not wanting to waste time I grabbed another receptacle and continued working. Later with only two left to install I experienced the same thing. This time I opted to use the side terminals. After closely inspecting the one I had skipped over I could see the wire holes were not uniform in size thus preventing the wire from pushing in. While only 2 receptacles suffered from this, that is a 20% failure rate. Faith needs to work a bit harder at making sure these wire holes are the correct size. Like before I had to reconfigure for using the side terminals. The other issue I had was some of the name brand wall plates where a bit difficult to fasten. It seems there is some variance or deformity on the receptacles. If your looking to install a bunch of receptacles with minimal downtime, I would probably chose another brand, but if you are okay with having to occasionally use the side terminals these can be a good buy.

+3 more

Good

Some of them doesn't got a cable grib on the hole in the back but I used the sides bolts for connection. If you don't grib on cables its not safe.